Tools

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts

High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm

- Removes square, ISIS, and Octalink style cranks - Recessed threads won't damage crank threads

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+) - Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares

RockShox Volume Reducer Kits

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

200 hour/1 year Service Kit (includes air can seals, piston seal, glide rings, IFP seals, remote spares, grease) - Deluxe Remote (2018+)

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Select+ Charger Sealhead) Sid 35mm Select+ C1/Sid 35mm Ultimate (2021)

- (18) Precision hardened bits in two Patented Bits Carriers - Professional bits made with hardened S2 steel - Nickel-plated for a long lasting finish that prevents marring - They resist rounded edges to protect your bolts - Compatible with all Prestacycle hex-bit hand tools - Set fits virtually every know bicycle bolt – including JIS! Features Highest quality bits Prestacycle offers the highest possible quality 1/4? hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4? hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. JIS Compatible Prestacycle bits sets do NOT contain U.S. Philips heads, which were specifically designed in 1932 to round-out as an alternative to torque tools. These are modern ANSI standard (compatible with the discontinued JIS standard) and can be used on any bicycle cross head bolt. (18) Precision hardened S2 steel Nickel-plated Professional bits in a Patented Bits Carrier. Stronger and longer lasting than any other tools made for bicycles. Since worn heads can damage bolts, these bits protect your components. Covers all major HEX sizes, Screwdriver sizes, and all the new TORX® sizes found on the latest components. - (18) Precision hardened bits in two Patented Bits Carriers - Professional bits made with hardened S2 steel - Nickel-plated for a long lasting finish that prevents marring - Resist rounded edges on the bits that could damage bolts - Compatible with all Prestacycle hex-bit hand tools - Industry-standard to fit all other tools that use 1/4? hex bits - Specific hex bits have micro surfacing to reduce slippage when in use

High quality bits Prestacycle high quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Real World Features Prestacycle Standard Bit sets are made of CRV Steel and include a unique feature allowing Hex bits to adapt to bolts of varying quality. Steel Hex bolts often have variations in actual bolt hole size, and potentially some variations in shape. Our CRV bits are tapered to fit these variations. These bits will insert until the reach full grip contact and will have no wobble. Depending on the bolt, this bits will not insert fully to the bottom, but instead will create a superior grip with no rounding. JIS Compatible Prestacycle bits sets do NOT contain U.S. Philips heads, which were specifically designed in 1932 to round-out as an alternative to torque tools. These are modern ANSI standard (compatible with the discontinued JIS standard) and can be used on any bicycle cross head bolt. Extended length bits fit bicycle specific applications like Rear Derailleur main bolts and recessed Brake Caliper bolts in Carbon Forks. Prestacycle hardened CR/V Bits offer the same quality and strength as most major Brand's best tools. Covers the most common HEX and TORX® sizes found on the latest components. Specifications: - HEX: 4mm, 5mm, 6mm - TORX®: T15, T20, T25

Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. JIS Compatible Prestacycle bits sets do NOT contain U.S. Philips heads, which were specifically designed in 1932 to round-out as an alternative to torque tools. These are modern ANSI standard (compatible with the discontinued JIS standard) and can be used on any bicycle cross head bolt. (6) Hardened S2 steel Nickel-plated Professional bits in a Patented Bits Carrier. 50mm Extended length bits fit bicycle specific applications like Rear Derailleur main bolts and recessed Brake Caliper bolts in Carbon Forks. Stronger and longer lasting than any other tools made for bicycles. Since worn heads can damage bolts, these bits protect your components. Covers the most common HEX and TORX® sizes found on the latest components. Specifications: - (6) Precision hardened bits in a Patented Bits Carrier - 50mm rounded shaft bits fit recessed bolts - Professional bits made with hardened S2 steel - Nickel-plated for a long lasting finish that prevents marring - They resist rounded edges to protect your bolts - Compatible with all Prestacycle hex-bit hand tools - Fit Rear Derailleur main bolts & Brake Caliper bolts in Forks - Industry-standard to fit all other tools that use 1/4" hex bits - Specific hex bits have micro surfacing to reduce slippage when in use Sizes: - HEX: 4mm, 5mm, 6mm - TORX®: T15, T20, T25

This compact folding utility knife will quickly find a home in your pack, in the shop, or at home. Stainless and aluminum construction provide a balance of low weight and durability, ready for years of daily use. Easily operable with one hand the folding design locks open during use and folds to half its size, perfect in a pocket or clipped to a belt, always ready for the next job. Standard replaceable blades are easy to find at your local hardware store.

Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.

Park Tool's versatile and durable 8oz Shop Hammer is a perfectly balanced striking instrument built for a wide variety of shop uses. - Forged steel, precision machined striking face - Non marring, replaceable composite tip - Fiberglass shaft with soft touch grip - 8oz (225g) Head - Length: 12" (30.5cm) - Steel striking face: 1" (25mm) diameter - Plastic face: 1-1/4" (32mm) diameter - Replacement tip: Part #293-8

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The DAG-3 features an all-new design, engineered and built to be light, accurate, and versatile. The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size and rotates out of the way to clear seat stays, racks, and other obstacles, allowing 360-degree measurement. The long, precision-extruded aluminum body is built to exacting tolerances and provides ample leverage for making adjustments. - Compatible with 16" to 29"+ wheels (ISO/ETRTO rim sizes from 317 to 630+) - Replaceable M10 threaded tip - Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers - Length: 16.5" (420mm) - Weight: 22.75 oz. (645g)

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.