Filter By:
- Bar Ends (11)
- BMX (72)
- Bottom Brackets (42)
- Brakes/Levers/Pads (392)
- Cassettes/Freewheels (42)
- Cranksets (244)
- Derailleurs (93)
- Forks (132)
- Show More Categories
- Handlebar Grips/Tape (230)
- Handlebars (265)
- Pedals (175)
- Saddles/Pads (51)
- Seatposts (93)
- Shift/Brake Combinations (32)
- Shifters (102)
- Shocks (34)
- Stems (142)
- Other (697)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Bike Parts
The Bike Lane carries a full selection of bike parts for all your cycling needs. Call us to upgrade your drive-train, get a new wheel set, or replace pedals, tires,handlebars, saddles and more.
$40.00
Zipp Speed Weaponry Cartridge Bearings
- Will not work on Zipp 188 V9 rear hubs
$2.00 - $23.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
- Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
$29.99
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Mounting hardware included
$32.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- Includes (2) M4x8 Flat Head Screws
Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
$23.00
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Mounting hardware included
$29.99
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Mounting hardware included
$26.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- Includes (1) M8 Chainring Bolt
$26.99
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Mounting hardware included
$34.99
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Mounting hardware included
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- Includes (2) M4x8 Flat Head Screws
Notes:
- PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED!
- FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!
$34.99
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Mounting hardware included
$11.99
This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.
$34.99
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks.
- Machined engineering-grade Delrin
- 48g/pr
*NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
$0.10 - $13.99
- High roundness grade 300 balls in a shop dispenser bottle
- 1/4"--250/bottle
- 1/8"--500/bottle
- 3/16"--500/bottle
- 5/16"--250/bottle
- 5/32"--500/bottle
- 7/32"--500/bottle
$50.00
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.
$77.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams
$78.99 - $109.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
$24.99 - $39.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$10.99
Shimano STI lever hoods.
- Fits Ultegra ST-6700 levers only
$30.00
This is a rear derailleur mount link for Shimano's XTR M9000 rear derailleur. A straight link is essential to optimal shifting performance and reliability.
$37.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
$24.99
Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
$46.99
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame.
- Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
$34.99
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device.
- Fits all SRAM road braze-on front derailleurs
- ChainSpotter not included
$46.99
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs.
- Wide-narrow pulley tooth profile holds the chain better
- Stainless steel sealed cartridge bearings
$47.00 - $70.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
$14.99 - $27.67
RockShox Reverb Hydraulic Hose Kit for replacing the hyraulic line on your Reverb dropper seatpost.
- Fits all generations of Reverb
- Includes new hose, new strain relief, new barb
$129.99
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth.
- Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief
- For "A1" designated posts, 2010-2012
- A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Page 1 of 92
Next page