Roof-Mount

Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.

The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.

With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.

Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches from end of bar

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)

Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.

The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis – up to 136mm at the tip – or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security, and the silver anodized aluminum finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super sleek setup (sold separately). Product Details - Easily carries four pair of skis – up to 136 mm wide at the tip - or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars – just add Yakima's SmarT-Slot Kit 2 (sold separately) Technical Specs - Weight: 10.00 lbs - Dimensions: L 30.50in x W 3.75in x H 5.25in

The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski and snowboard mount. It is wide enough to carry six pairs of powder skis – up to 136mm at the tip – or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The HangOver clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security.

- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity

The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!

Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.

Yakima's new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and stronghold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - Securely carries a variety of bikes including road, mountain and up to 5” fat-tire bikes. - Seamlessly carries both quick release (9 mm) and thru axle bikes (12 mm, 15 mm, 20 mm). - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low profile tray minimizes hatch interference and accomodates tires up to 5” wide. - Tool-free, universal mounting hardware fits most roof racks - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately). - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately). - Carry quick release 9 x 135 mm fat bike with the Optional Fat Bike Adapter Kit(sold separately). TECHNICAL SPECS - Weight: 20.00 lbs - Dimensions: L 22.00” x W 22.00” x H 5.00”

Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24 inches or more

Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.

The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.

Got a Texas-sized SUV equipped with Yakima's LoadWarrior rooftop carrier? Then you may need Yakima's LoadWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 18 inches and 40% more carrying capacity to Yakima's LoadWarrior rooftop basket (sold separately).

Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.

Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

No matter where you go, Yakima's Raptor Aero keeps your bike securely in place. It's especially convenient because no bike disassembly is required. You'll love this if you have bolt-on or hard-to-remove wheels. Plus, the Raptor's padded jaws hold most bicycles tight yet won't scratch the paint. The Raptor comes with two ratcheting wheel straps and fits most crossbars right out of the box.

Bar adapter that allows you to run RoundBar on StreamLine Towers.

Toting a tandem can be tough. Not any more. Yakima's Sidewinder makes it easier than ever to transport your twofer. The clever swingarm fork mount makes loading a one-person task and the padded boom cradle won't harm bottom-routed cables. Universal snap-around mounts allow the Sidewinder to attach equally well to round (Yakima) and square crossbars. It's designed to clear hatches and flip-up rear doors on most vehicles, too.

Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24 or more

Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.