Pedals

- 1-Piece, molded, cage-style body - Loose ball bearings - Accepts toe clips/straps - Spindle Material: Chromoly - 305g

Built to take on anything, the SPEEDPLAY ZERO road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel dual-sided bike pedal and integrated cleat system offer peak power transfer and exceptional durability. The customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Cleats are included. DUAL-SIDED ENTRY SPEEDPLAY ZERO pedals' symmetrical form factor allows for dual sided pedal entry when clipping in. No more fumbling, fussing or kicking your pedal over; take off when the light turns green and clip in with ease. ENHANCED WALKABILITY The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike. INTEGRATED PROFILE SPEEDPLAY ZERO pedals and Standard Tension Cleat create a seamless integration for a streamlined profile. The secure connection can contribute to an increase in the transfer of power, which can make it easier to attain those hard fought watts. UNBEATABLE STACK HEIGHT Best-in-class stack height of the SPEEDPLAY pedal decreases the amount of material between your shoe and spindle. This provides a solid connection for a more fluid transfer of power with every pedal stroke. 3-AXIS CLEAT ADJUSTABILITY The Standard Tension Cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float. OPTIMIZED BIOMECHANICS The 3-axis adjustability and slim stack height of the SPEEDPLAY Advanced Bike Pedal System allows the rider to customize their fit on the bike with the largest range of optionality. The lower stack height can allow for increased power transfer and a decreased saddle height, which results in reduced drag. ROTATIONAL FREE FLOAT SPEEDPLAY pedals allow up to 15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency. SUPERIOR CORNERING CLEARANCE The slim profile of the SPEEDPLAY Advanced Pedal System allows for the greatest degree of lean on the bike when riding tight corners. Pedal with confidence knowing your pedal won't strike the ground, and leave the competition in the dust. STANDARD TENSION CLEAT INCLUDED SPEEDPLAY ZERO pedals include a set of Standard Tension Cleats and cleat surrounds for the most aerodynamic profile & walkable system. EASY TENSION CLEAT COMPATIBLE SPEEDPLAY Advanced Pedal System has cross cleat compatibility. Purchase the Easy Tension cleat, sold separately, for less resistance when unclipping.

The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level. - Weight: 224g (per pedal pair) - Spindle Material: Chromoly - Spindle Length: 53mm - Float: 5 to 15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings. - 380 grams - 9/16" axles

Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with dual bushings ensure lasting performance. PRODUCT DETAILS - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on dual bushings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench

Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

The PD-EF202 is a versatile pedal compatible with any flat-soled shoe. Pedal hard with confidence as you’re rushing to work, as the wide and grippy platform will keep your feet planted on the pedals. The chromoly steel axle is durable and low maintenance so you can rack up the miles without worrying about your pedals. - The PD-EF202 is a Flat Pedal for Everyday Riding: Dependable and perfect for everyday riding, commuting, and city adventures. - Confident Pedaling: Wide aluminum body creates a stable platform. - Non-Slip: Textured surface offers a reliable high-grip pedal compatible with casual shoes. - Trickledown Technology: Chromoly steel axle offers durability equal to higher-grade models. - Multi Colour: Available in five colors including black, blue, red, gold and silver.

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident. CLEAN APPEARANCE - The PD-ES600 features a clean appearance body for use on lightweight road touring bikes. EASY RIDER ADJUSTMENT - Easy-to-adjust entry and release tension settings. SYSTEM ENGINEERED TO WORK TOGETHER - SHIMANO RT footwear is designed to match the PD-ES600.

These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)

Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

- Enhanced pedal-to-shoe contact area with mud-shedding profile - Wide bearing placement for rigidity and uniform load distribution - Slimmer, weight-optimized axle with 2 length options - Low platform height for pedaling stability - Lightweight, 310 g (11 oz.) per pair - Slimmer axle housing better sheds mud and debris - Binding Dual Sided - Cartridge axle - SM-SH51 Cleat included - Cleat retention adjuster - Offset binding - Sealed mechanism - Average weight: 310g (Short axle type) - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - 3 mm shorter axle version (52mm) - 1.0 mm cleat spacer included

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

If you ride hard, these are the pedals for you. Durable ballistics-grade Nylon will stand up to whatever you're dishing out and keep your cranks spinning through the savage streets. There's a reason these come stock on our city-crushers.

The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g

The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Aluminum - Spindle: Chromoly+ - Platform area: 350mm² - Platform width: 57mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°

The AE03 Evo Pedals are the lightest of HT Components' EVO line. Platform pedals with replaceable pins on an extruded, CNC-machined aluminum body give a stiff and responsive feel, while dual DU bushing bearings keep them turning smoothly. These 11mm thick pedals provide tons of clearance for navigating technical terrain and narrow ruts. - Platform: 102 x 96 x 11mm -Constructed from extruded aluminum with CNC machining -Dual DU bushing internals - 10 replaceable pins per side

Designed in conjunction with the super stylish Swedish giant Martin Soderstrom, the ANS10 Supreme offers the perfect amount of traction, platform and feel. - Platform: 100 x 100 x 16.6mm - Constructed from extruded aluminum with CNC machining - Dual DU bushing internals - 10 replaceable pins per side

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

Get ready to ride Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included. - MTB pedals with dual sided SPD-compatible engagement - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle: 9/16-inch

Get ready to ride Take your riding to the next level with Bontrager Comp road pedals. A fully-adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this Look Keo-style pedal. Cleats and hardware included. - Road pedals with Look KEO-style compatibility - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle diameter: 9/16-inch - Weight: 282g

Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance. Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)