The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
$60.00 - $120.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
$149.00 - $169.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but youll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
On your next roadtrip, free up a little space inside your car with Thule's Interstate rooftop cargo bag. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The double-coated laminate material is rugged and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home the Interstate folds down for compact storage.
Ultra premium lift assist carrier reduces up to 40lbs of a kayak's weight and allows side of vehicle loading, unloading, and strapping. Features - Gas struts lift and lower 40lbs or 90% of the kayaks weight - Load and unload kayaks at waist level, at the side of the vehicle for greater convenience and safety - Double extending arms lower the kayak up to 40” for faster loading and unloading - Corrosion-resistant kayak cradles expand to fit wide kayaks - 8 touch points of padded support for maximum protection for your kayak - Aluminum, double coated steel construction for corrosion resistance delivers a longer product life - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs Technical specifications - Load capacity Water Crafts: 1 kayak - Fits Aero Profile: Yes - Fits SquareBar: Yes - Lockable: Yes - One Key System compatible: Yes - Factory rack mounting hardware included: No - Carrying type: Lift Assist
Fitting kit required for perfect fit of the roof rack to a specific car.
A versatile, horizontal kayak carrier with large cushioned, flexible pads that conform to a large range of hull shapes as well as SUPs. - Protects the hull with large, flexible, cushioned pads - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks and SUPs up to 36 in/90 cm wide and 85 lbs/40 kg - Easily secure the kayak or SUP using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Can carry a variety of hull shapes as well as SUPs with two independent pivoting saddles with angle-setting lever
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis – up to 136mm at the tip – or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security, and the silver anodized aluminum finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super sleek setup (sold separately). Product Details - Easily carries four pair of skis – up to 136 mm wide at the tip - or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars – just add Yakima's SmarT-Slot Kit 2 (sold separately) Technical Specs - Weight: 10.00 lbs - Dimensions: L 30.50in x W 3.75in x H 5.25in
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
$499.95 - $599.95
Thule's premium Trail carrier basket combines exclusive design with high quality materials. Its multiple integrated and innovative functions are intuitive to use and provide an incredibly versatile platform for adventure. The Trail features a flat cargo area with eight adjustable tie-down loops to secure your gear. Thule's T-track channels are integrated into the front and rear of the rack to mount bike carriers, ski racks, and other accessories. The Trail mounts to all Thule rack systems, as well as round bars and most factory racks.
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
Upright bike carrier for the quickest, most convenient mounting-for bikes up to 44 lbs. - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray. - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting. - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage. - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw. - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps. - Easy, tool-free interface for switching carrier from one side of your car to the other. - Mounts on Thule AeroBlade Edge, Thule AeroBlade, Thule SquareBar and round bars.
Innovative kayak carrier that is safe, stylish, easy to use, and integrates seamlessly with Thule roof rack systems. Features - Quickly raise or fold when not in use using the convenient front release handle - Easily manage load straps while strapping down the kayak using the integrated StrapCatch - Kayaks are protected during transit due to the durable and soft rubber padding - Theft resistant design keeps carrier securely attached to load bars (locks included) - Easy to install directly into the Thule WingBar Evo or AeroBlade T-track, or around Thule SquareBar via the integrated, tool-free mounting hardware (SquareBar requires an adapter) Technical specifications - Load capacity: 75 lb - Dimensions: 18 x 8 x 17.5 in - Weight: 15.2 lb - Rubber cover for strap buckle - Lockable - One Key System compatible Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar (Adapter/s required: Thule SquareBar Adapter 4-pack) - ProBar - Xsporter Pro
One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only
The Thule Circuit Fork Mount low-profile carrier is designed for those looking for security, convenience and aerodynamic styling. - AeroHead low-profile reinforced head combines aerodynamics, durability and style - SecureSkewer for fast loading and security w/ Thule’s One-Key lock cylinder (sold separately) - Tool-Free universal mounting makes it simple and easy to install - Integrated wheel cradle high-wall design provides protection and perfect fit beneath your wheel - Low profile aluminum tray made from corrosion-resistant aluminum to withstand the elements - Ratcheting wheel strap quickly secures back wheel to tray - Fits most factory supplied rack systems - Works with 15mm, 20mm and lefty forks with adapter (sold separately)
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
Page 1 of 3 Next page