Parts & Accessories
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - Poly leather (vegan) toe strap - Velvet finish - 450mm length
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
The ultimate weight-saving upgrade. - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
- Steel - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 50 grams per pair
Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length
- Steel - Intended for use with double-strap toe straps (sold separately) - Classic road toe clip profile - Includes mounting hardware - 36 grams per pair
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench
Speedplay's new Walkable Cleat technology for Ultra Light Action pedals sets a new standard for user-friendly, off-the-bike functionality. Speedplay's Ultra Light Action Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward. Included with the cleat sets are handy plugs called Cleat Buddies for use when walking in dirty conditions. Cleat Buddies prevent debris contamination by fitting into the cleat's center cavity. When you are ready to ride, Cleat Buddies can be easily removed for riding and conveniently snap together to fit in a pocket or bag. - Grippy, rubberized tread covers the cleat for improved traction - Durable cover material is resistant to wear and will not scuff floors - Thin, contoured cleat profile makes walking easier and more fluid - Fits all standard 3-Hole and 4-Hole shoes
Previous page Page 2 of 2