Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Problem Solvers Handlebar Clamp Shim
$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
KMC MissingLink Connector
$1.98 - $46.18
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Surly Singleator
$50.00
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Bontrager Rear Mount Adjustable Kickstand
$24.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
Problem Solvers Cable Doubler
$55.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
Surly Constrictor Seatpost Clamp
$15.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
SRAM Power Link Chain Connector
$17.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Eagle Chain Connector 12-Speed
$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
SRAM PowerLock Link Chain Connector
$17.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Bontrager Blendr Pro Stem Bases
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Surly Stainless Seatpost Clamp
$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.25
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Dimension Seatpost Clamp
$17.99
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
ESI Silicone Tape
$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
Surly Mr. Whirly Spindle
$57.50
Surly Mr. Whirly Spindles. - 100% CroMoly steel - Proprietary dimensions and spline for use only with Surly Mr. Whirly cranks
Surly Mr. Whirly Crank Arm Fixing Bolt
$6.50
Surly Mr. Whirly Crank Arm Fixing Bolts - For use with Surly Mr. Whirly cranks only
Surly Disc Brake Adaptor
$7.00
Rear disc brake adaptor specifically designed ONLY for the Surly Troll, Ogre and ECR. - For use with 160mm rotor only - Brake caliper must be 74mm post mount compatible
RockShox Reverb Remote Lever Assembly A1
$129.99
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth. - Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/8-inch
$11.99
This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.
Sunlite Alloy Seatpost Shims
$16.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
RockShox Reverb Stealth Inner Sealhead
$49.50
Inner Seal Head Assembly for servicing A1 and A2 generation Reverb and Reverb Stealth dropper seatposts. - Seals the upper tube from the inner shaft as it cycles - Fits A1 (2010-2012) and A2 (2013-2016) generation Stealth seatposts - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - New as of 06/14
Problem Solvers Double Chainring Bolts Dual Hex Head - 8mm
$20.65
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Greenfield KS5 Kickstand & Plate
$11.99 - $12.99
The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)
Shimano XTR M9000 Rear Derailleur Bracket Axle Unit
$30.00
This is a rear derailleur mount link for Shimano's XTR M9000 rear derailleur. A straight link is essential to optimal shifting performance and reliability.
Wheels Manufacturing Inc. Derailleur Hanger 61
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!
Problem Solvers Brake Boss Plugs
$5.00
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
Thomson Stem Cap
$6.49
- Machined aluminum with three Thomson logos circling the cap
Page 1 of 24 Next page