$92.00 - $100.00
SRAM X01 Chainring Guards - Material: Polycarbonate - Chainring BCD: 94 - Mount Type: Chainring
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
SRAM BB30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only - Install with headset press and green Loctite
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
$6.60 - $6.72
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
• Covers the unused high-mount front derailleur mount on 1x-equipped bikes • Black anodized aluminum
$18.00 - $23.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
$6.00 - $24.00
Flat Mount Disc Caliper Bracket Bolts
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
$19.99 - $26.99
Disc Brake Adaptors - Includes Stainless Bolts
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM Caliper Brake Adjusting Barrel with Nut and Cable Fixing Assembly.
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
Red eTap battery terminal cover
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
- For charging batteries in European countries
Page 1 of 1