Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools

$6.00 - $9.99
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

$6.95
Park Tool's Derailleur Clutch Wrench is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.

$6.99
Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.

$6.99
MSW Pencil Gauges show both PSI and BAR for ranges from 10-120. They are intended for use with Schrader Valve bicycle tires.
- Schrader valve head

$6.99
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced.
- For Torx Plus screws
- Particularly hard for semi-hard materials
- 1/4" hexagon drive
- High torque transfer
- Size: 40 IP x 25mm

$7.00
- Gel contains non-Abrasive plastic beads that provide increased surface friction
- Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc)
- Prevents corrosion/scuffing and quiets creaking noises
- Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired
- Always follow the manufacturer's torque specifications when clamping carbon parts

$7.00
Zipp Speed Weaponry Valve Extender Wrench Set
- Two 4 mm and 5 mm combination wrenches
- Replacement wrenches required to properly install Zipp integrated valve extenders
- Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

$7.95
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

$7.95
Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.

$7.95
Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.

$7.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

$7.95
Precision measurement awaits with Park's Tape Measure. This small and handy tool boasts a tough, composite housing, as well as both Metric and English readings of up to 3.65 meters/12 feet.

$7.95
Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).

$7.99
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

$8.00
- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification.
- Made from heat-treated S2 tool steel to ensure high strength and lasting performance.
Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.

$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

$8.94 - $15.90
- Exceptional friction reduction and anti-wear properties with greatly reduced friction in metal to metal applications

$8.95
• 12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc.
• Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws
• The CSB-1 is designed for use with the SG-8 Saw Guide.
NOTE: Similar to a grinding stone, do not use this blade on aluminum

$8.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across.
- Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings
- Fits the SRAM XX1 11-speed cassettes
- Also fits Shimano disc brake lockrings
- Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

$8.95
The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

$8.95
Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.